Why are we not offering the Sewer Master or the Sewer Supreme hoses?
The reason is, we have engineered a true RV sewer hose and it is called Polychute. This new hose will in all probability be the LAST sewer hose you will ever need to buy. We set out to design a sewer hose that would eliminate all of the issues associated with RV industry standard sewer hoses. This took more than 2 years to accomplish as hose manufacturers want to sell what they have, which is NOT what we, as RVers, wanted.
The Polychute is made of a special blend of Polyethylene TPE material with UV inhibitors and flame retardant additives. It has no metal wire in it and the spiral is on the outside, so it acts as a wear strip. The inside of the hose is very smooth and because there is no metal wire in it the hose is crush proof. In addition the hose has a 3 to 1 compression ratio and is spring loaded so it wants to be in its collapsed state making it very easy to handle.
The hose comes in a couple of different options to meet your specific needs. If your coach sewer outlet fitting is a male Cam Loc fitting or threaded fitting The Waste Master version can be customized to your specifications if needed.
If you have the common industry bayonet fitting, see our Polychute version. The Polychute version is 16’ long extended and approximately 5’ in its relaxed position. The Polychute comes in its own convenient storage case which eliminates odors and all versions come with our patented nozzle swivel on the end. 
We believe Polychute will not only exceed your expectations, but it will soon become the sewer hose that everyone owns.
So I am trying to find an extention to my original hose, on that will clamp onto the dump nozzle. The system is not long enough to reach to the rear of the 5th wheel to the dump tube. Have you figured out how to hook your new tubing on to the nozzle?
Hi Glen,
I am a little confused by your question. I do know you have our nozzle which plugs into the sewer inlet at RV parks, but I do not know which hose assembly you have. Assuming you have our system and it is not long enough to reach the sewer inlet where you are, you can simply remove the donut and thread on any sewer hose to the barrel on the nozzle. You will need to put a towel or rag under it to catch any drips. It is a temp fix for this issue. If you have our system you can buy a 16’ extension hose system, see our part # 5693. You can also contact us if you would like to discuss your issue further, 877 787 8833 x 12.